Phone:
(701)814-6992
Physical address:
6296 Donnelly Plaza
Ratkeville, Bahamas.
（1）Environmental - Friendly Calcium - Zinc Composite Stabilizer Series
1.ZT 611
| Item | Details of ZT 611 |
|---|---|
| Model | ZT 611 |
| Appearance | Slightly yellow flake |
| Melting Point | ≥85℃ |
| Volatiles | ≤1% |
| Recommended Dosage (per 100 kg of PVC Resin) | 3.5 – 4.0 |
| Main Features | Environmentally friendly and non – toxic, complying with EU environmental directive requirements. Good long – term thermal stability, good lubricity, and relatively good processing fluidity. Suitable for the production of low – calcium PVC products with environmental requirements, such as water supply pipes. |
2.ZT 612
| Item | Details of ZT 612 |
|---|---|
| Model | ZT 612 |
| Appearance | White or slightly yellow flake |
| Melting Point | ≥85℃ |
| Volatiles | ≤1% |
| Recommended Dosage (per 100 kg of PVC Resin) | 3.0 – 4.0 |
| Main Features | Environmentally friendly and non – toxic, complying with EU environmental directive requirements. Good long – term thermal stability and relatively good processing fluidity. Suitable for the production of soft PVC products with environmental requirements. |
3.ZT 613
| Item | Details of ZT 613 |
|---|---|
| Model | ZT 613 |
| Appearance | Slightly yellow flake |
| Melting Point | ≥85℃ |
| Volatiles | ≤1% |
| Recommended Dosage (per 100 kg of PVC Resin) | 3.5 – 4.5 |
| Main Features | Environmentally friendly and non – toxic, complying with EU environmental directive requirements. Good long – term thermal stability, good lubricity, and relatively good processing fluidity. Especially suitable for the production of PVC products with environmental requirements and high filling (filling amount ≤ 150%). |
（2）Ordinary lead salt composite stabilizer series
1.ZT 318
| Item | Details of ZT 318 |
|---|---|
| Model | ZT 318 |
| Appearance | White flake |
| Lead Content | 26.5 – 27.5% |
| Content of Other Metals | 3 – 5% |
| Melting Point | ≥85℃ |
| Volatiles | ≤1% |
| Recommended Dosage (per 100 kg of PVC Resin) | – |
| Main Features | – |
| Lead Content (Second Spec) | 22.5 – 23.5% |
| Melting Point (Second Spec) | ≥80℃ |
| Volatiles (Second Spec) | ≤1% |
| Recommended Dosage (Second Spec, per 100 kg of PVC Resin) | 4.6 – 5.5 |
| Main Features (Second Spec) | Good stability and lubricity, enabling relatively high output and good surface finish of products. Especially suitable for extrusion production of PVC products with high calcium content (calcium content above 150 parts). |
Note: The above recommended dosages should be adjusted according to the equipment, molds, raw and auxiliary materials, formulation system, and processes used by each factory.